HomeOur Productsmerchant SearchAbout NefaCustomer Informationmerchant InformationContact Us
Our Products Latest NEFA price list Our Warranty

We are so confident in our products that we offer a full replacement, 5 year warranty.

Find out more

For more information on any NEFA product, call our Customer Service number on:

1300 00 NEFA
(1300 00 6332)

NEFA Australia
Suite A / 1048 Beaudesert Road
Coopers Plains QLD 4108
Free Phone: 1300 00 NEFA (6332)
Free Fax: 1300 00 6333
Phone: +61 (0) 7 3246 5270
Fax: +61 (0) 7 3246 5214

Our Products

NEFA valves are a premium quality range of safety and control valves for plumbing installations. All our valves provide superior flow characteristics, with the PTR, ECV and PLV fitted with stainless steel seats. NEFA valves are Watermarked and certified to Australian Standards and carry a 5 year warranty.

The NEFA Tempering Valve (TTV) is fitted in the hot water delivery line to sanitary outlets. By mixing cold water with the hot water delivered by the water heater, the TTV maintains a constant, safe water temperature to these outlets. This valve is available in standard (black cap) or high performance (yellow cap) versions. PLEASE NOTE: Only the High Performance TTV (yellow cap) is recommended for solar applications.
More Info
All storage water heaters require a functioning Pressure & Temperature Relief Valve (PTR) of the correct pressure and heat rating. The PTR is a safety valve that relieves excessive pressure within the water heater. It will also discharge water before the water temperature exceeds 99 degrees Celcius in the event of a thermostat failure.
More Info
The NEFA Expansion Control Valve (ECV) is connected to the cold water supply at the inlet to the cylinder. It relieves excess water pressure created in the cylinder due to thermal expansion. Fitting an ECV is also an energy efficiency measure due to the discharge of cold water rather than hot water during the heating cycles.
More Info
The recommended installation of a PRV valve is at the connection to the dwelling at the property boundary. Alternatively, it can be installed before the inlet to the water heater or appliances. This valve’s main function is to protect fittings, appliances and water heaters by limiting the maximum delivered water pressure to the preset outlet setting of 350kPa, 500kPa or 600kPa.
More Info
The NEFA Non Return & Isolating Valve (NRI) is installed in the cold water supply to the water heater. Its primary function is to isolate the water supply to the hot water heater so that maintenance can be undertaken. Its secondary function is a non return valve to prevent backflow from the hot water heater into the cold water supply.
More Info
The Isolating Pressure Reducing Valve is a single unit incorporating the 4 items normally required for hot water installations. Incorporating the following units: • Inlet Isolation Valve • Adjustable Pressure Reducing Valve • Line Stainer • Non return Valve
More Info
NEFA Australia
Copyright © 2007 Methven Australia Pty Ltd | Terms & Conditions | Privacy Policy